Wrought iron gates etc

[LyndaS]

Hi all,

Can anyone recommend someone who can provide and replace our existing gate and wrought iron grilles/doors?

Lynda

[John H]

Mateu in El Altet, great company, excellent service, very reasonable prices.

See http://www.cerrajeriamateu.com/web/

Regards all

John


Sent from my iPhone using Tapatalk

[LyndaS]

Thanks John ,

that's great, will pop in past and see them.

[steve watson]

I used a guy named Hoost 14 years ago, someone recommend him very good , concertina grilles etc, plactica coated , still look new. .
Not sure if he is still going but he came measured and fitted without any problems and was very reasonable on price.
These are the phone numbers I have moblie 0034606218363. Home 0034966715832 !!!
Please let me know if he is still about,
Steve

[Corporal Jones]

14 years ago someone recommended a guy called robin hood i kid you not, the grills looked fab but sadly rusted after 5 years. Incidentally most grills are secured to the walls with high tensile security bolts, a neighbour once got locked out of there house and duly removed the grille in 5 minutes with just 1 basic tool and swiftly lifted out the locked window unit out thus gaining entry to the house.

[BeachLife]

Iron Art were the ones we used - certainly made of old iron !


Sent from my iPhone via Tapatalk

[Aficionado]

Mateu in El Altet, great company, excellent service, very reasonable prices.

See http://www.cerrajeriamateu.com/web/

Regards all

John


Sent from my iPhone using Tapatalk

We have a round table on our terraza with a hole in the centre for a parasol. The three legs are locked together at about 1/3rd height with a tripod style piece of metal in the centre of which is a further hole for said parasol to pass through.

We decided to buy a new parasol - then discovered that the base of same was too tall and wide to pass through said lower hole. Two choices - back to the shop in the hope of finding a base that would fit, or make the hole bigger.

Off to Mateu with the tripod I went - all sorted on the spot in about half an hour, old centre cut out, new 'hole' created by slicing off 1/4 inch from a length of suitable diameter steel pipe, welding it in, buffing and priming and away - done for 15 euros.

Great chat with the engineer who did it, turns out he has a son and daughter working in London.

As John says, a great little company to have on our doorstep.

Michael.

BTW, they don't speak English so take someone with you if you don't speak Spanish.